SKU: YMGF00085-14@888This site contains affiliate links for which we may be compensated
Home & Garden / Home Improvement / Electrical Supplies / Alternative Energy Supplies / Solar Power Supplies / Solar Cells & Kits
Specifications 300Ah Battery type: LIFEPO4 MODEL: 300Ah 12.8V(4S3P) Rated capacity: 300Ah(3840WH) Normal voltage: 12.8V Discharge termination voltage: 10.0V Charging voltage: 14.6V Internal resistance: ≤180mΩ Single cell: IFR 3.2V 100Ah Standard charging. Continuous current: 0.2C5A Continuous voltage: 14.6V Cut-off current: 0.01 C Standard discharge: Constant current 0.2C5A end voltage 10.0V Max. charging continuous current: 100A Maximum discharge continuous current: 100A Operating temperature range. Charge: 0~60℃ Discharge: -20~70℃ Product size: 520*270*220mm Weight : 21.78 kg(48 lbs) BMS protection Cell overcharge detection voltage:3.90V±50mV Cell overcharge recovery voltage:3.80V±100mV Cell over-discharge detection voltage:2.00V±100mV Cell over-discharge recovery voltage:2.30V±100mV Rated operational charge current:100A Over current detection:150±30A PCM impedance:≤50mΩ 100Ah Battery type: LIFEPO4 MODEL: 100Ah 12.8V(4S1P) Rated capacity: 100Ah(1280WH) Normal voltage: 12.8V Discharge termination voltage: 10.0V Charging voltage: 14.6V Internal resistance: ≤180mΩ Single cell: IFR 3.2V 100Ah Standard charging. Continuous current: 0.2C5A Continuous voltage: 14.6V Cut-off current: 0.01 C Standard discharge: Constant current 0.2C5A end voltage 10.0V Max. charging continuous current: 100A Maximum discharge continuous current: 100A Operating temperature range. Charge: 0~45℃ Discharge: -20~70℃ Product size: 329*171*235mm Weight : 11.6kg BMS protection Cell overcharge detection voltage:3.90V±50mV Cell overcharge recovery voltage:3.80V±100mV Cell over-discharge detection voltage:2.00V±100mV Cell over-discharge recovery voltage:2.30V±100mV Rated operational charge current:100A Over current detection:150±30A PCM impedance:≤50mΩ Note The BMS it supports up to 51.2V series or 16 parallel installations of
the same voltage and same capacity (4S4P), please fully charge the
batteries before series/parallel installation to ensure that each
battery is at the same voltage and same capacity. 50Ah Battery type: LIFEPO4 MODEL: 50Ah 12.8V(4S9P) Rated capacity: 50Ah(640WH) Normal voltage: 12.8V Discharge termination voltage: 10.0V Charging voltage: 14.6V Internal resistance: ≤180mΩ Single cell: IFR 32700 3.2V 6000mAh Standard charging. Continuous current: 0.2C5A Continuous voltage: 14.6V Cut-off current: 0.01 C Standard discharge: Constant current 0.2C5A end voltage 10.0V Max. charging continuous current: 50A Maximum discharge continuous current: 50A Operating temperature range. Charge: 0~45℃ Discharge: -20~60℃ Product size: 228*138*208mm Weight : 7kg BMS protection Cell overcharge detection voltage:3.90V±50mV Cell overcharge recovery voltage:3.80V±100mV Cell over-discharge detection voltage:2.00V±100mV Cell over-discharge recovery voltage:2.30V±100mV Rated operational charge current:50A Over current detection:70±5A PCM impedance:≤50mΩ Note It does not have series/parallel protocol, please do not use it for multiple series or parallel installations. Package Included: 1* 12V 300Ah/100Ah/50Ah Lithium Battery 2 Pcs* Terminal Screws Please be noted: Battery charger is not included. FREQUENTLY QUESTIONS ASKED Q: Can I connect Batteries with AGM batteries? A: We do not suggest you connect lithium iron phosphate (LiFePO4) batteries with AGM batteries, as they are two different types of batteries and their charging and discharging are very different. Q: Are Batteries waterproof? A: All of our LiFePO4 battery has an IP65 protection class, which sets you free from worrying to install it indoors or outdoors. But when charging or discharging the battery, please be careful not to let the post bolts or terminals come into contact with water, as this may damage the battery. Q: How to activate BMS when the battery is dead? A: General Steps If the BMS has cut off the battery for protection, follow the below steps to activate it. Step 1: Cut off all the connections from the battery Step 2: Leave the battery aside for 30mins. Then the battery will automatically recover itself to normal voltage (>10V) and can be used after fully charged. If the battery is unable to recover itself after the above steps.please try activating by one of below two methods. After activated (voltage>10V) and fully charged by the normal charging method, it can be used normally. Method ① Use a charger with a 0V charging function to fully charge the battery Method ② Connect an 18V-36V solar panel directly to charge the battery without a controller for 10~30mins in sunny daytime.
Returns Accepted for this item if it's within 30 Days